Transmission Chain of Power 1 Meter 18x50mm Drag Cable Chain Wire Carrier Transmission Towline Bridge Type for CNC Engraving Machine Tools Transmission Chain of Power(R38)

18x50mm Wire Carrier Cable Drag ChainBridge Outside OpeningWith End Connectors TowlineFor CNC Router Machine ToolsEquipment Cable ProtectionPackage includes:1 Meter X Drag Chain (Length includes both end Connectors)Quick selection of specifications:18x25mm,18x37mm,18x50mm.Towline selection of main parameters:Within high: Select built-in cable, tubing, pipe, pipe, etc. As one of the most coarse reference height,plus at least 10% of the height of the space within the towline as high. If the overlap byoverlapping the actual height as the reference height.Wide: Choose thicker some cables, tubing, pipe, water pipes, with its outer diameter and as thetowline wide reference, and stay at least 10% of the width of the space.Bending radii R: choose built-in cable, tubing, pipe, pipe, etc. The maximum bending radius as a reference value, and left more than 10 percent of the space.Use towline length = R + 0.5R + stroke / 2After bending towline total height = 2R + external highTowline place principles: Should leave 15% of the remaining space for built-in cable, tubing, etc., may move freely in theradial direction of the towline does not produce tension. Larger diameter difference between thewire should be laid separately, weight distribution, if necessary, be separated by the dividing sheet.In the high-speed or high-frequency operation, to try to make the wires apart from each other on a level, do not make it mutually stacked more time in the cable, pipe, tubing, etc. is recommended touse separators.==========Hign-concerned Chemical : noneModel Number : 18 SeriesItem Type : Mechanical Kit/Hardware PartsInner Size : 18X50mmOuter Size : 23.5x60mmMax outer diameter of cable : 15mmPitch : 33mmLink Per meter : 34Material : PlasticStructure : Bridge Type Exterior OpeningWith Connector : YesSmall mechanical equipment : 3D PrinterEquipment Cable Protecti

• 1) Suitable for use in a reciprocating motion of the occasion, can be built-in cable, tubing, pipe,plumbing, etc. play traction and protection.
• 2) Each section towline can open, easy installation and maintenance. Exercise low noise,wear-resistant, high-speed movement.
• 3) The towline has been widely used in CNC machine tools, electronic equipment, stone machinery,glass machinery, doors and windows machinery, injection molding machines, robots, overweighttransportation equipment, automated warehouses.